Forward top fuse install

Total: 1665.8 hours
Top Fuse Skin: 36.3 hours
Top fuse install: 15.7

Top fuse install happened without any significant problems. The top fuse was installed way back in section 31 and stored (see here) then once the panel decisions were made and the sub-panel reinforced for the GTN650 (see here) and the cutouts made for the defrost fans I could do the install. To do the fan cutouts I drilled the attach holes of the fan first, found the center, drilled a pilot hole in the center, clamped a wood block under and used a 3 inch hole drill and went slow, No problem.

 

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s